How To Measure Your Door Opening- 48″ x 72″ Wood Replacement Shed Doors

 

To find out if our doors will fit your shed, measure using this guide.

VERTICAL MEASUREMENT

Measure the vertical door opening from the bottom of the door header, that’s the  piece of wood at the top of your door opening, to the floor. If you have a threshold guard on your floor, measure to that.

Our standard doors need a vertical rough opening of 70-1/4″. If your measurement is more, our doors will not properly fit your shed.

If your vertical rough opening is less then 70-1/4″, order the custom set of doors and email us your door opening measurements after you place your order and we will build the proper size door for you.

 

HORIZONTAL MEASUREMENT

Measure your horizontal opening from one side door frame to the other side. Your opening will probably be framed with a single or double, 2×4″, 2×3″ or 2×2″.  Some sheds may not have a stud at the end of the wall. In this case, for proper fit of your doors, you’ll need a stud installed. Measure the size needed, cut the stud and toe nail it in and you’ll be ready for our doors.

Our standard doors need a horizontal rough opening width of 47-3/4″. If your measurement is more, our doors will not properly fit your shed.

If your horizontal measurement is less then 47-3/4″, order the custom set of doors and email us your door opening measurements after you place your order and we will build the proper size door for you

Place your order for 48″ x 72″ doors here.

Place your order for custom 48″ x 72″ doors here doors here.

 


 Posted by at 11:12 pm

 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

(required)

(required)

*